Stirling Engine Steam Motor 16 Cylinder Model Generator External Combustion Toy. A Stirling engine is a heat engine that operates by cyclic compression and expansion of air or other gas, the working fluid, at different temperature levels such that there is a net conversion of heat energy to mechanical work. The engine is like a steam engine in that all of the engine's heat flows in and out through the engine wall. Thank you for shopping with us! This is an external combustion engine in which the fuel is burned continuously, and the piston is moved by the expansion of air as a medium, and the expansion gas is cooled in the cold chamber, and the cycle is repeated.
Only a small alcohol lamp, you can make it fast rotation and strong power. As the external combustion engine to avoid the traditional internal combustion engine of the explosion to do work, in order to achieve a high efficiency, low noise, low pollution and low operating costs. The biggest advantage of the external combustion engine output and efficiency from the influence of altitude, very suitable for high altitude areas.
Aerodynamics are rich in knowledge of physics, engine principle is intuitive, educational toys, teaching experimental equipment can effectively cultivate children's interest in learning can also be used for classroom teaching, more intuitive and easy to understand. A floating bead links 8 cylinders and its piston to drive based on the motor power from hot air, hard to believe it is a engine model, super cool, 8 cylinders, 8 heating tube.
8 fire-outlet sparks the fire flame to the stainless heating tube, cool. By the external heat source isothermal heating. So on heat, for heat with. To the coolant isothermal exothermic, complete a cycle.
The engine model on the horizontal position by hand toggle the flywheel to see if smooth, if there is a strong sense of raw astringent, check the connection rod is normal, whether the cylinder oil and dust, and if so, please use toilet paper to erase Not smooth. Toggle the flywheel feel pressure rebound within the cylinder body is a normal phenomenon, the cylinder is sealed.The packing bag of alcohol lamp cotton wear into the metal cap lamp. Fill the alcohol lamp to less than two-thirds. Alcohol lamp to the alcohol lamp, at the premise of ensuring safety, ignite the alcohol lamp about 2 minutes after the flywheel, until the flywheel automatic operation so far, the whole process of heating, hands may not touch. Due to the different display and different light, the picture may not reflect the actual color of the item. Please allow little differs due to manual measurement. 1 x Hot Air Stirling Engine Model. An overview of the features and technical parameters. Stainless Steel + Solid Wood. 16 Cylinders (8 Heating Pipes + 8 Cooling Pipes). Product Size: 21.51016.5cm. We will respond to you within 24 hours and do our best to help you out! This item is in the category "Toys & Hobbies\Models & Kits\Tools, Supplies & Engines\Engines". The seller is "galaxy_zone" and is located in this country: CN.
This item can be shipped worldwide.